LumiPar 7IP
ORDER CODE: LUMIPAR7IP
Share me

IP65

Immagine Principale
  • LUMIPAR7IP
  • LUMIPAR7IP
  • LUMIPAR7IP
  • LUMIPAR7IP
  • LUMIPAR7IP
  • LUMIPAR7IP
  • LumiPar 7IP
    Code Optics Avail.
    LUMIPAR7IP20D 20°
    LUMIPAR7IP45D
    DISCONTINUED
    45°

    LumiPar 7IP is a compact and flexible IP LED PAR made for small concerts and theatres, and to perform as architectural accent luminaire for outdoor events. The housing in die-cast aluminium is designed to feature both as a robust workhorse and totally fanless being totally silent during its operation.

    Features:
    IP65 die-cast aluminium housing
    7x9W RGBW LED PAR
    Fanless and flicker-free operation for IMAG and broadcast
    Filter frame included

    LIGHT SOURCE
    • Source:
      7x9
      W
      RGBW LEDs
    • Luminous flux:
      (20°) 2'945 lm - (45°) 3'835
    • Lux:
      (20°) 1'923
      lx
      @3 m full
    • Lux:
      (45°) 654
      lx
      @3 m full
    • Source life expectancy:
      > 50.000 h
    OPTICS
    • Beam angle:
      available in 20° or 45
      °
    • Field angle:
      36° or 60
      °
    COLOUR SYSTEM
    • Colour mixing:
      RGBW / FC
    • White presets:
      3.000 K ~ 10.000
      K
    • Colour wheel:
      virtual colour wheel with macros
    • Macros:
      built-in white presets
    DYNAMIC EFFECTS
    • Static mode:
      selection of static colour
    • Manual mode:
      manual adjustment of colour
    • Auto mode:
      built-in programs with execution speed adjustment
    BODY
    • Body:
      sturdy die-cast aluminium body
    • Body colour:
      black
    CONTROL
    • Protocols:
      DMX512
    • DMX channels:
      4 / 6 / 11
      channel
    • Display:
      black OLED touch display
    • Firmware upgrade:
      yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
    • Master/Slave:
      for synchronised operation of more units linked in a chain
    ELECTRONICS
    • Dimmer:
      linear 0 ~ 100% electronic dimmer
    • Dimmer curves:
      4
      selectable dimming modes available
    • Strobe / shutter:
      0 - 30
      Hz, electronic
    • Operating temperature:
      -20° ~ +45°
    • LED Control:
      flicker free operation
    • Selectable PWM:
      600 ~ 25.000 Hz
    ELECTRICAL
    • Mains power supply:
      100-240V - 50/60Hz
    • Max power consumption:
      65
      W
    • Max power consumption (at 120V):
      64
      W
    • Output (at 230V):
      58
      units on a single power line
    • Output (at 120V):
      31
      units on a single power line
    PHYSICAL
    • IP rating:
      65
      for temporary outdoor application, not for fixed installations
    • Cooling:
      passive cooling and fan-free
    • Suspension and fixing:
      double hanging bracket suitable for safe hanging and for floor positioning
    • Signal connection:
      Seetronic XLR 5p IN/OUT connectors
    • Power connection:
      Seetronic powerCON waterproof IN/OUT connectors
    • Dimensions (WxHxD):
      240x286x154
      mm
    • Weight:
      3,64
      kg
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA, RCM
    BOX CONTENT
    • 1 x LUMIPAR7IP
    • 1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power connector)
    • User Manual
    ITEMS REF.
    Accessory Code
    Description
    optional
    Optic lens 15°, D.45mm
    optional
    Optic lens 25°, D.45mm
    optional
    Optic lens 45°, D.45mm
    optional
    Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    optional
    Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
    optional
    Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

    Data sheet & specs

    File name File size Download
    Letter datasheet Lumipar7ip_A4_DATASHEET_(EN).pdf 172KB
    Letter datasheet Lumipar7ip_A4_DATASHEET_(IT).pdf 172KB

    DMX chart & personalities

    LUMIPAR7IP Firmware rev. 1.3
    manufacturer fixture library (Link) Link
    prolights_lumipar7ip.d4Download
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link
    prolights_lumipar7ip_4ch.hedDownload
    prolights_lumipar7ip_6ch.hedDownload
    prolights_lumipar7ip_11ch.hedDownload
    manufacturer fixture library (Link) Link
    prolights@lumipar7ip@4ch.xmlDownload
    prolights@lumipar7ip@6ch.xmlDownload
    prolights@lumipar7ip@11ch.xmlDownload
    manufacturer fixture library (Link) Link
    LUMIPAR7IP Firmware rev. 1.2
    manufacturer fixture library (Link) Link
    prolights_lumipar7ip.d4Download
    manufacturer fixture library (Link) Link
    prolights_lumipar7ip_4ch.hedDownload
    prolights_lumipar7ip_6ch.hedDownload
    prolights_lumipar7ip_11ch.hedDownload
    prolights@lumipar7ip@4ch.xmlDownload
    prolights@lumipar7ip@6ch.xmlDownload
    prolights@lumipar7ip@11ch.xmlDownload

    CAD symbols & drawings

    File name File size Download
    2D Lumipar7ip_2D.dwg 11MB
    Technical drawing Lumipar7ip_TECHNICAL_DRAWING.pdf 397KB

    Tech docs

    File name File size Download

    Software

    File name File size Download

    Firmware

    Firmware update instructions

    1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

    2 Download the updater software UpBox_Tool 

    3 Follow the instructions in the following guide
    -------------------------------------------------------------------------------
    Notes: 
    • Firmware updates require the UPBOXPRO compatible with all Prolights products
    • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
    • UpBox_Tool  software is compatible with all UPBOX interfaces
    • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.3 STABLE 08/02/2023 New functions:
    • Added RDM functionality

    Fixed bugs:
    • Fixed display bug on power off
    1.2 STABLE 17/12/2018 10 second default display backlight
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.3 STABLE 08/02/2023 New functions:
    • Added RDM functionality

    Fixed bugs:
    • Fixed display bug on power off
    1.2 STABLE 17/12/2018 10 second default display backlight

    Info Request