Quadro 18UTRI discontinued
ORDER CODE: QUADRO18UTRI
Share me

Immagine Principale
  • QUADRO18UTRI
  • QUADRO18UTRI
  • QUADRO18UTRI
  • QUADRO18UTRI
  • QUADRO18UTRI
  • QUADRO18UTRI
  • QUADRO18UTRI
  • QUADRO18UTRI
  • QUADRO18UTRI
  • Quadro 18UTRI is a LED projector with a super-slim design and high luminous efficiency all through use of 18 LED 3W RGB with colour calibration RGB/FC. The ultra-thin design and the fan-less operation, make Quadro 18UTRI an innovation compared to the bulky-structured traditional projectors, providing greater versatility, quick installation and ease of transport. The electronics of the Quadro 18UTRI allows control of the LED panel into three independent sections making it possible for operators to create dynamic colour effects of the stage.

    Features:
    18x3W RGB/FC LEDs
    Ultra-thin design and fan-less operation
    WIFIBOX ready with WIFI USB (optional)

    LIGHT SOURCE
    • Source:
      18x3
      W
      RGB LEDs
    • Luminous flux:
      2'040
    • Lux:
      1'927
      lx
      @3 m full
    • Source life expectancy:
      > 50.000 h
    OPTICS
    • Beam angle:
      13
      °
    • Field angle:
      32
      °
    COLOUR SYSTEM
    • Colour mixing:
      RGB / FC
    • CCT:
      CCT control through dedicated DMX channel
    DYNAMIC EFFECTS
    • Static mode:
      selection of static colour
    • Manual mode:
      manual adjustment of colour
    • Auto mode:
      built-in programs with execution speed adjustment
    BODY
    • Body:
      sturdy die-cast aluminium body
    • Body colour:
      black
    CONTROL
    • Protocols:
      DMX512
    • DMX channels:
      3 / 5 / 9 / 13
      channel
    • Pixel control:
      section control
    • Wireless Control:
      optional, proprietary protocol compatible with WIFIBOX, WDBOX
    • Display:
      LED display user interface
    • Firmware upgrade:
      yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
    • IR:
      infrared sensor controlled by remote
    • Master/Slave:
      for synchronised operation of more units linked in a chain
    ELECTRONICS
    • Dimmer:
      linear 0 ~ 100% electronic dimmer
    • Dimmer curves:
      4
      selectable dimming modes available
    • Strobe / shutter:
      1 - 28
      Hz, electronic
    • Operating temperature:
      0° ~ +45°
    • LED Control:
      flicker free operation
    ELECTRICAL
    • Mains power supply:
      100-240V - 50/60Hz
    • Max power consumption:
      51,5
      W
    • Max power consumption (at 120V):
      54
      W
    • Output (at 230V):
      24
      units on a single power line
    • Output (at 120V):
      12
    PHYSICAL
    • IP rating:
      20
    • Cooling:
      passive cooling and fan-free
    • Suspension and fixing:
      double hanging bracket suitable for safe hanging and for floor positioning
    • Data:
      USB port for USB WIFI transmitter (optional)
    • Signal connection:
      XLR 3p IN/OUT connectors
    • Power connection:
      IEC IN/OUT connectors
    • Dimensions (WxHxD):
      395x260x55
      mm
    • Weight:
      3,4
      kg
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA
    BOX CONTENT
    • 1 x QUADRO18UTRI
    • 1 x 1,5 meters BARE END - IEC power cable
    • User Manual
    ITEMS REF.
    Accessory Code
    Description
    optional
    Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black
    optional
    Dmx cable HC5340. CANC3MXX XLR 3p->CANC3FXX XLR (f) 3p, L.3m
    optional
    Power cable VDE socket, SCHUKO plug
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    optional
    USB Wi-Fi transreceiver, compatible with WIFIBOX and WDBOX
    optional
    DMX controller interface, Wi-Fi/DMX IN, Wi-Fi / DMX OUT
    optional
    Wireless DMX Transceiver, IN/OUT 3-pin XLR, distance 200m, 2.4 GHz, 0.6 kg
    optional
    RGBWA IR remote controller, manual / auto modes, for LUMIPAR IR series
    optional
    Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
    optional
    Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

    Data sheet & specs

    File name File size Download
    Letter datasheet Quadro18utri_A4_DATASHEET.pdf 382KB

    User manual

    File name File size Download
    User manual Quadro18utri_USER_MANUAL_ITEN.pdf 2MB

    DMX chart & personalities

    File name File size Download
    QUADRO18UTRI Firmware rev. 1.1
    manufacturer fixture library (Link) Link
    prolights_quadro18tri.d4Download
    manufacturer fixture library (Link) Link
    quadro18tri_3ch.fdfDownload
    quadro18tri_5ch.fdfDownload
    quadro18tri_9ch.fdfDownload
    quadro18tri_13ch.fdfDownload
    manufacturer fixture library (Link) Link
    manufacturer fixture library (Link) Link

    Photometrics

    CAD symbols & drawings

    File name File size Download
    2D Quadro18utri_2D.dwg 1MB
    3D Quadro18utri_3D.dwg 26MB
    Technical drawing Quadro18utri_TECHNICAL_DRAWING.pdf 241KB

    Tech docs

    File name File size Download

    Software

    File name File size Download

    Firmware

    Firmware update instructions

    1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

    2 Download the updater software UpBox_Tool 

    3 Follow the instructions in the following guide
    -------------------------------------------------------------------------------
    Notes: 
    • Firmware updates require the UPBOXPRO compatible with all Prolights products
    • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
    • UpBox_Tool  software is compatible with all UPBOX interfaces
    • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    1.1 STABLE 17/02/2016 Improved Dmx management.

    Info Request