StudioCob PlusTU
ORDER CODE: STUDIOCOBPLUSTU
Share me

IP65

Immagine Principale
  • STUDIOCOBPLUSTU
  • STUDIOCOBPLUSTU
  • STUDIOCOBPLUSTU
  • STUDIOCOBPLUSTU
  • STUDIOCOBPLUSTU
  • STUDIOCOBPLUSTU
  • STUDIOCOBPLUSTU
  • STUDIOCOBPLUSTU
  • STUDIOCOBPLUSTU
  • StudioCob PlusTU
    Code Housing Avail.
    STUDIOCOBPLUSTUBK Black
    STUDIOCOBPLUSTUWH
    DISCONTINUED
    White

    StudioCob PlusTU is a powerful, incredibly versatile and IP65 rated LED PAR. Fusing the old and the new, it pairs a COB LED source with a traditional parabolic reflector to deliver a proper PAR replacement with a homogenised output, single shadow and flexible lens options.

    Features:
    IP65 rated connectors for easy use both indoor and outdoor
    150W 3.000K Warm White COB LED source with HD dimming and high CRI
    Flexible lens options of 18° - 38° - 60°

    LIGHT SOURCE
    • Source:
      150
      W
      Tungsten White LED
    • CCT:
      3.000
    • Luminous flux:
      (18°) 8'419 - (38°) 7'837
    • Lux:
      (18°) 5'873
      lx
      @3 m
    • Lux:
      (38°) 1'483
      lx
      @3 m
    • CRI:
      > 90
    • Source life expectancy:
      > 30.000 h
    OPTICS
    • Beam angle:
      (on-board) 18° - (inc) 38° - (opt) 60
      °
    • Field angle:
      (on-board) 36° - (inc) 63
      °
    • Lens type:
      parabolic reflector in combination with HD fresnel lens
    • Additional optics:
      flood (without lens) - 38° (inc)
    DYNAMIC EFFECTS
    • Static mode:
      selection of static colour
    • Manual mode:
      manual adjustment of dimmer and strobe
    • Auto mode:
      built-in programs with execution speed adjustment
    BODY
    • Body:
      sturdy die-cast aluminium body
    • Body colour:
      black, white finishing available
    CONTROL
    • Protocols:
      DMX512, RDM
    • DMX channels:
      1 / 2 / 5
      channel
    • RDM:
      RDM for remote monitoring and settings
    • Display:
      black OLED touch display
    • Firmware upgrade:
      yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
    • Master/Slave:
      for synchronised operation of more units linked in a chain
    ELECTRONICS
    • Dimmer:
      linear 0 ~ 100% electronic dimmer
    • Dimmer curves:
      4
      selectable dimming modes available
    • Strobe / shutter:
      1 - 28
      Hz, electronic
    • Display battery:
      self-charging battery backup
    • Operating temperature:
      -20° ~ +45°
    • LED Control:
      flicker free frequency with adjustable PWM
    • Selectable PWM:
      600 ~ 25.000 Hz
    ELECTRICAL
    • Mains power supply:
      100-240V - 50/60Hz
    • Max power consumption:
      141
      W
    • Max power consumption (at 120V):
      147
      W
    • Output (at 230V):
      12
      units on a single power line
    • Inrush current:
      110VAC/8.2A, 230VAC/10A
    PHYSICAL
    • IP rating:
      65
      for temporary outdoor application, not for fixed installations
    • Cooling:
      active, silent operation
    • Suspension and fixing:
      double hanging bracket suitable for safe hanging and for floor positioning
    • Signal connection:
      Seetronic XLR 5p IN/OUT connectors
    • Power connection:
      Seetronic powerCON waterproof IN/OUT connectors
    • Dimensions (WxHxD):
      259x187x370
      mm
    • Weight:
      4,95
      kg
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA, RCM, cTUVus, FCC
    BOX CONTENT
    • 1 x STUDIOCOBPLUSTU
    • 1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power connector)
    • User Manual
    ITEMS REF.
    Accessory Code
    Description
    optional
    Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    include
    Optics for STUDIOCOBPLUS projectors series, 18°
    include
    Optics for STUDIOCOBLUS projectors series, 38°
    optional
    Filter frame for STUDIOCOB projectors
    optional
    Optics for STUDIOCOBLUS projectors series, 60°
    optional
    Barn door 4 directional flaps to adjust the light beam, f. frame included
    optional
    Flight case for 8 STUDIOCOBPLUS
    optional
    Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
    optional
    Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

    User manual

    File name File size Download
    User manual Studiocobplustu_USER_MANUAL_ITEN.pdf 1MB

    DMX chart & personalities

    STUDIOCOBPLUSTU Firmware rev. 2.5
    manufacturer fixture library (Link) Link
    prolights_studiocobplustu.d4Download
    manufacturer fixture library (Link) Link
    prolights_studiocobplustu_1ch.hedDownload
    prolights_studiocobplustu_2ch.hedDownload
    prolights_studiocobplustu_5ch.hedDownload
    STUDIOCOBPLUSTU Firmware rev. 2.3
    manufacturer fixture library (Link) Link
    prolights_studiocobplustu.d4Download
    manufacturer fixture library (Link) Link
    prolights_studiocobplustu_1ch.hedDownload
    prolights_studiocobplustu_2ch.hedDownload
    prolights_studiocobplustu_5ch.hedDownload

    Tech docs

    File name File size Download

    Software

    File name File size Download

    Firmware

    Firmware update instructions

    1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

    2 Download the updater software UpBox_Tool 

    3 Follow the instructions in the following guide
    -------------------------------------------------------------------------------
    Notes: 
    • Firmware updates require the UPBOXPRO compatible with all Prolights products
    • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
    • UpBox_Tool  software is compatible with all UPBOX interfaces
    • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    2.5 STABLE 31/10/2023 Improvement:
    • Increased to 65535 the maximum working hours of the device.

    Info Request