NOVAHOC11 
ORDER CODE: NOVAHOC11
Novastar output card for NOVAH, 4xoptical fiber (increased).
8x 10G OPT Ports
- OPT 1 to OPT 4 serve as the primary ports, and OPT 5 to OPT 8 serve as the backup ones.
- OPT 5 backs up or copies the output on OPT 1.
- OPT 6 backs up or copies the output on OPT 2.
- OPT 7 backs up or copies the output on OPT 3.
- OPT 8 backs up or copies the output on OPT 4. - The loading capacity of one OPT port is equal to that of 10 Ethernet ports.
- Free topology supported.
Flexible screen configuration without rectangle restriction on a single Ethernet port. The total resolution of the large screen loaded by the device must be within the device loading capacity. - Max loading capacity: 26,000,000 pixels (max. width: 16,384 pixels, max. height: 16,384 pixels)
- Copy and backup modes are supported. Only the cards set in the same modes can be used together to load a screen.
- Supports 8-bit and 10-bit outputs. The output bit depth needs to be set in NovaLCT.
- Supports 144Hz output.
- Bothe the single-mode and multiple-mode optical modules are supported, with the transmission distance of up to 10 km and 300 m respectively.
- The optical module supports SFP+ encapsulation. The supported module specifications include the followings:
- Multi-mode optical module: 10G SFP+ SR optical module
- Single-mode optical module: 10G SFP+ LR optical module - This card cannot be used together with the H_4xfiber sending card, H_20xRJ45 sending card or H_16xRJ45+2xfiber sending card to load the same screen.
- The cards of the same type with the same frame rate but different resolutions can be used together to load a screen.
- The screen loaded by this card supports the fade transition effect.
- For the H15, up to 2x 8K, 4x 4K, 8x DL, 16x 2K layers are supported.
- For the H15 enhanced, up to 2x 8K, 4x 4K, 5x DL, 10x 2K layers are supported.
Specifications
- Weight: 500 g
- Dimensions: 193 mm × 247.12 mm × 21.15 mm
- Power consumption: 36 W
Notes:
- For the H_4xfiber sending card (enhanced), four 10G SFP+ LR optical modules are included with the card and are already installed into the OPT 1 to OPT 4 ports.
- When the screen is loaded by the H_4xfiber sending card (enhanced), NovaLCT V5.4.8 or above is required for screen configurations.
- It is recommended to connect a CVT series fiber converter to the OPT port.
- For the receiving cards that support the free topology function, please contact out technical support staff to obtain related information
Main features:
-
{DESC_CARATTERISTICHE}
