PHYRO1500UFC end of life
ORDER CODE: PHYRO1500UFC
Share me

Immagine Principale
  • PHYRO1500UFC
  • PHYRO1500UFC
  • PHYRO1500UFC
  • PHYRO1500UFC is the latest fog machine by TRIBE able to emit a high-pressure vertical jet, simulating the special effect that until today has only been achievable with a CO2 based machine. The special design of the pump and heater allows for an instant emission of start and stop with a jet which reaches a considerable height and through the use of specific liquids the fading is almost immediate in the environment.

    Features:
    LED source: 6x3 W RGB / FC
    Plug & play technology: PHYRO1500UFC is ready to work when connected with no need of additional settings or connection
    Wireless controller included
    Electronic thermal sensor against over-heating failures
    Security system against clogging or pump failures
    Functioning based on an internal heater for high pressure and voluminous fog emission

    ELECTRICAL
    • Power Supply:
      AC 100 - 240 V 50 / 60 Hz
    • Power Consumption (at 120V):
      1.550
      W
    • LED Source:
      6x3 W RGB / FC
    • Heather:
      1.500 W
    FLUID
    • Operating Time:
      18 sec
    • First Heat-up Time:
      5 min
    • Output:
      5 m height - 1 m width
    • Tank Capacity:
      2,5
      L
    • Fluid Consumption Rate:
      200
      ml/min
    • Liquid Used:
      liquido per fumo a base d'acqua
    CONTROL
    • Protocols:
      DMX512
    • Display:
      4 digit display
    • Remotes:
      DIN 5p remote controller - remote timer
    PHYSICAL
    • Signal connection:
      XLR - 3p IN/OUT
    • Power connection:
      IEC 10 A IN
    • Dimensions (WxHxD):
      500x370x245
      mm
    • Weight:
      8,32
      kg
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA
    BOX CONTENT
    • 1 x PHYRO1500UFC
    • 1 x 1,5 meters BARE END - IEC power cable
    • 1 x remote control
    • User Manual
    ITEMS REF.
    Accessory Code
    Description
    optional
    Dmx cable HC5340. CANC3MXX XLR 3p->CANC3FXX XLR (f) 3p, L.3m
    optional
    Power cable VDE socket, SCHUKO plug
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    optional
    Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black
    optional
    Cleaner fluid for fog machines
    optional
    Low-density haze machine fluid, water-based
    optional
    Medium/standard density fluid for fog machines, pink fluid
    optional
    High-density fluid for fog machines, orange fluid
    optional
    Super-density fluid for fog machines, green fluid
    include
    Wireless remote controller for PHYRO series athmosperic machines
    include
    Wired remote controller for PHYRO fogger machines

    Data sheet & specs

    File name File size Download

    User manual

    DMX chart & personalities

    File name File size Download
     
    manufacturer fixture library (Link) Link
    prolights_phyro1500ufc.d4Download
    manufacturer fixture library (Link) Link
    prolight_phyro1500ufc_7ch.hed Download

    Photometrics

    File name File size Download

    CAD symbols & drawings

    File name File size Download

    Tech docs

    File name File size Download

    Software

    File name File size Download

    Firmware

    Firmware update instructions

    1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

    2 Download the updater software UpBox_Tool 

    3 Follow the instructions in the following guide
    -------------------------------------------------------------------------------
    Notes: 
    • Firmware updates require the UPBOXPRO compatible with all Prolights products
    • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
    • UpBox_Tool  software is compatible with all UPBOX interfaces
    • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
    Update Tool: {Upbox}
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    0.1 STABLE 04/07/2018

    Info Request