SOLAR27Q
PROLIGHTS

Solar 27Q

ORDER CODE: SOLAR27Q

27x10W high brightness indoor/outdoor compact wash light

Solar 27Q is a compact fan-free outdoor wash light featuring an outstanding brightness of 10'832 lumens. Equipped with 27x10W RGBW/FC LEDs, delivering superior colour mixing. Featuring a slim size as well as the multiple interchangeable optics through magnets, including asymmetrical filters which, all together, make the Solar 27Q an incredibly flexible device for indoor use and outdoor. Whilst highly-powerful, the Solar 27Q also benefits from being silent.

Main features:

  • 27x10W RGBW/FC LEDs, delivering 10'832 lumens
  • Compact form factor and fan-free
  • Wireless DMX on-board

PHOTO GALLERY

Technical specifications

LIGHT SOURCE
  • Source: 27x10W RGBW LEDs
  • Luminous flux: @FULL 10'832 lm - with included filter 6'987
  • Lux: @FULL (25°) 6'340 lx - with included filter 1'027lx @3 m full
  • Lux: @FULL (25°) 2.282 lx - with included filter 370lx @5 m full
  • CRI: 71,8
  • Source life expectancy: > 50.000 h
OPTICS
  • Beam angle: 25°
  • Additional optics: 10° / 15° / 45° / 40° filter /60° filter/ 10x60° filter / 30x60° filter
  • Other: magnetic 40° filter included , barn door not included
COLOUR SYSTEM
  • CCT: CCT control through dedicated DMX channel
  • Colour wheel: virtual colour wheel with macros
DYNAMIC EFFECTS
  • FX generator: section effect with 3 horizontal individually select and control sections
  • Static mode: selection of static colour
  • Manual mode: manual adjustment of colour
  • Auto mode: built-in programs with execution speed adjustment
CONTROL
  • Supported Protocols: DMX512, RDM, W-DMX
  • DMX channels: 5 / 7 / 10 / 13 / 17ch
  • RDM: for remote addressing and parameter configuration
  • Display: Graphic User Interface
  • Master/Slave: for synchronised operation of more units linked in a chain
MOVEMENT
  • Tilt: 0 - 150° with manual adjustment
ELECTRONICS
  • Dimmer: linear 0 - 100% electronic dimmer
  • Dimmer curves: selectable dimming modes available
  • Display battery: included, self-charging battery backup
  • Selectable PWM: 600 to 25000 Hz (selectable steps)
  • Firmware upgrade: via DMX with UPBOXPRO/UPBOX1 (not included)
CONNECTIONS
  • Power connection: Seetronic powerCON waterproof IN/OUT connectors
  • Signal connection: Seetronic XLR 5p IN/OUT connectors
  • Wireless Connection: integrated LumenRadio TiMo FX RDM - CRMX and W-DMX compatible
  • Data connection: W-DMX receiver
ELECTRICAL
  • Mains power supply: 100-240V - 50/60Hz
  • Max power consumption (230V): 268W
  • Output (at 230V): 9 units on a single power line
  • Max power consumption (120V): 275W
  • Output (at 120V): 5 units on a single power line
  • Power factor: > 0,94
PHYSICAL
  • IP rating: IP65 for temporary outdoor use
  • Cooling: fan-free with natural convection
  • Housing: Sturdy die-cast aluminium body
  • Finish: black
  • Operating temperature: Ta -20 to +50 °C (-4 to +122 °F)
  • Dimensions (WxHxD): 454x269x83mm / 17.87''x10.59''x3.27''
  • Weight: 9kg / 19.84lbs
INSTALLATION
  • Bracket system: floor stand bracket compatible with quick-lock Omega brackets
  • Hardware on-board: magnetic filter frame with 40° filter
CERTIFICATIONS / REPORTS
  • Compliance: CE, UKCA, RCM
BOX CONTENT

Versions

Accessories & Related Products

OS25PLUS
OS25PLUS
(Optional)
Quick-lock omega bracket, M12 hole
RSR0630B
RSR0630B
(Optional)
Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
<b>ÆtherBox</b> One
ÆtherBox One
(Optional)
IP65 1x universe CRMX transceiver, DMX, Ethernet protocols, Wi-Fi, Bluetooth, battery-ready, POE
<b>ÆtherBox</b>
ÆtherBox
(Optional)
IP65 1 universe CRMX transceiver, DMX and Ethernet protocols, Wi-Fi, Bluetooth and battery ready
C6002B
C6002B
(Optional)
Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black&White& White
S27QLENS25
S27QLENS25
(Included)
25° lens for SOLAR27, ARCPOD27, SOLAR48, ARCPOD48, ARCPOD15 and ARCPOD96 series
S27QFILTER60
S27QFILTER60
(Optional)
60° symmetric light diffusion filter for SOLAR27Q
S27QFILTER40
S27QFILTER40
(Included)
40° symmetric light diffusion filter for SOLAR27Q
S27QFILTER1060
S27QFILTER1060
(Optional)
10x60° asymmetric light diffusion filter for SOLAR27Q
S27QFILTER3060
S27QFILTER3060
(Optional)
30x60° asymmetric light diffusion filter for SOLAR27Q
S27QLENS10
S27QLENS10
(Optional)
10° lens for SOLAR27, ARCPOD27, SOLAR48, ARCPOD48, ARCPOD15 and ARCPOD96 series
S27QLENS15
S27QLENS15
(Optional)
15° lens for SOLAR27, ARCPOD27, SOLAR48, ARCPOD48, ARCPOD15 and ARCPOD96 series
S27QLENS45
S27QLENS45
(Optional)
45° lens for SOLAR27, ARCPOD27, SOLAR48, ARCPOD48, ARCPOD15 and ARCPOD96 series
SUNBLASTFLR
SUNBLASTFLR
(Optional)
Hanging bracket for SUNBLAST floor positioning, quick-look
S27QBD
S27QBD
(Optional)
Black barn door 4 directional flaps to adjust the light beam, SOLAR27Q,ARCPOD27Q
FCLS27Q
FCLS27Q
(Optional)
Flightcase for 6 pcs of SOLAR27Q
UPBOXPRO
UPBOXPRO
(Optional)
Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

DOWNLOAD

Data sheet & specs

File name File size Download
Letter datasheetSolar27q_A4_DATASHEET_(EN).pdf(02/09/2021)213KB
Tender SpecificationSolar27q_TENDER_SPECIFICATION.pdf(15/09/2020)3MB

User manual

File name File size Download
User manualSolar27q_USER_MANUAL_EN.pdf(25/08/2025)7MB

DMX chart & personalities

File name File size Download
DMX chartSolar27q_DMX_CHARTS.pdf(04/03/2024)107KB

SOLAR27Q Firmware rev. 3.8

manufacturer fixture library (Link) Link
manufacturer fixture library (Link) Link
prolights_solar27q_5ch.hedDownload
prolights_solar27q_7ch.hedDownload
prolights_solar27q_10ch.hedDownload
prolights_solar27q_13ch.hedDownload
manufacturer fixture library (Link) Link
prolights@solar27q_10ch@.xmlDownload
prolights@solar27q_17ch.xmlDownload
prolights@solar27q_17ch.hog4showDownload

Photometrics

File name File size Download
IESprolights_solar27q_ies_files.zip(10/04/2026)507KB
PhotometricsSolar27q_PHOTOMETRICS.pdf(13/02/2020)7MB
DialuxDownload DIALux product catalogue-

CAD symbols & drawings

File name File size Download
3D RFASolar27q_3D.rfa(23/04/2021)568KB
3D SKPSolar27q_3D.skp(23/03/2020)345KB
2DSolar27q_CAD_2D.dwg(06/10/2022)2MB
3DSolar27q_CAD_3D.dwg(18/02/2020)684KB
2D cad symbolsSolar27q_CAD_2DSYMBOLS.dwg(09/03/2020)218KB
Technical drawingSolar27q_TECHNICAL_DRAWING.pdf(06/10/2022)375KB
VectorWorksPROLIGHTS_VECTORWORKS_v2025_LIBRARY.vwx(13/05/2025)321MB
VectorWorksPROLIGHTS_VECTORWORKS_v2020_LIBRARY.vwx(13/05/2025)276MB
VectorWorksVECTORWORKS_SYMBOLS.vwx(09/03/2020)641KB

Tech docs

File name File size Download

Software

File name File size Download

Firmware


Firmware Update Information

PROLIGHTS product firmware can be updated in several ways, depending on the product and file extension. The available methods are listed in the product specifications in the CONTROL - Firmware upgrade section.

Method/Device File extension Needed software Instructions
UPBOXPRO (*) .PRL UpBox_Tool Guide
USB port .PRL No software needed see User Manual 
Ethernet port .EHEX Professional Uploader Guide
Ethernet port .ALF DMX Workshop Guide

(*) You can still use UPBOX1 and UPBOX2 by checking their compatibility on the product accessories page. To use UPBOX2, you need to download the drivers from the following link.

Note: Some products without DMX or USB inputs may require an additional device and may not be compatible with UPBOXPRO. Check here  the products list.

UPDATE Instructions

  1. Check the update methods available on your product in the CONTROL - Firmware upgrade section.
  2. Download the firmware and software dedicated for the update.
  3. Follow the update guide available in the firmware folder.
Update Tool: UPBOXPRO UPBOXPRO
Check hardware changelog before downloading firmware
Revision Release date Firmware changelog HW Compatibility
3.8 STABLE 14/01/2025 Firmware for Hardware revision: 2.0 - To check revision please refer to serial number. Units with hardware revision 2.0 are with serial number starting from xxxxx0120xxx.

Improvement:
  • Set by default Full on Mode@HB Mode.
2.8 STABLE 13/01/2025 Firmware for Hardware revision: 1.0 - To check revision please refer to serial number. Units with hardware revision 1.0 are with serial number before of xxxxx0120xxx.

Improvement:
  • Set Full on Mode@HB Mode by default.

Info Request

News

PROLIGHTS at the Heart of Two New Futuroscope Attractions
May 15, 2026
PROLIGHTS at the Heart of Two New Futuroscope Attractions
Futuroscope , the renowned technology-driven theme park near Poitiers , France , has opened two new attractions: La Serre des Mondes and Mission Bermudes , both featuring PROLIGHTS lighting solutions supplied by ESL . The two projects addressed very different
HaluPix Duo Powers Sombr at Coachella 2026
May 04, 2026
HaluPix Duo Powers Sombr at Coachella 2026
The 2026 edition of the Coachella Valley Music and Arts Festival , held across two weekends in April at the Empire Polo Club in Indio, California, once again set the standard for large-scale festival production. On the Outdoor theatre stage, alt-rock
Gazzelle live at Circo Massimo and San Siro with PROLIGHTS
April 30, 2026
Gazzelle live at Circo Massimo and San Siro with PROLIGHTS
Italian singer-songwriter Gazzelle brought his music to two of Italy's most iconic venues, performing at Circo Massimo in Rome and San Siro Stadium in Milan . On both occasions, PROLIGHTS fixtures played a central role in the lighting design, contributing
PROLIGHTS launches Smart ParNeo: IP-rated battery-powered spotlight
April 28, 2026
PROLIGHTS launches Smart ParNeo: IP-rated battery-powered spotlight
PROLIGHTS launches Smart ParNeo , an IP-rated battery-powered spotlight that expands the iconic SmartBat series with a more flexible and versatile design. Combining portability, advanced colour control and adaptable mounting options, Smart ParNeo is designed
PROLIGHTS Takes Centre Stage at LightNeq Session 2026 in Prague
April 27, 2026
PROLIGHTS Takes Centre Stage at LightNeq Session 2026 in Prague
This year's LightNeq Session , the three-day professional event for the technical production industry held in Běchovice , Prague , set a new attendance record, bringing together more than 160 specialists from rental companies, theatres, television studios
PROLIGHTS Astra Hybrid260IP Achieves Full Global Compliance, Including US FDA CDRH Certification
April 17, 2026
PROLIGHTS Astra Hybrid260IP Achieves Full Global Compliance, Including US FDA CDRH Certification
The PROLIGHTS Astra Hybrid260IP has completed its international compliance portfolio with the receipt of US FDA CDRH certification for its 260W white phosphor laser source. The fixture now holds CE , RCM , FCC , cTUVus , and FDA CDRH approval, and is
Music & Lights announces the upcoming arrival of 3,000 sqm of URMIII for the Italian market.
April 09, 2026
Music & Lights announces the upcoming arrival of 3,000 sqm of URMIII for the Italian market.
Music & Lights , exclusive distributor for the Italian market of Unilumin Rental solutions, announces the upcoming arrival of 2,000 sqm of URMIII P2.6 U-Shield   and 1,000 sqm of URMIII P3.9 Outdoor. Two complementary stocks, indoor and outdoor, designed
Astra Profile500LTIP Chosen for Finland's 27th KONGRESSI Meetings & Events
April 08, 2026
Astra Profile500LTIP Chosen for Finland's 27th KONGRESSI Meetings & Events
Now in its 27th edition, KONGRESSI meetings & events , one of Finland 's leading b2b events for the meetings and events industry, brought together the key buyers, professionals and service providers of the sector at Helsinki Expo and Convention Centre
Music & Lights at MIR 2026 with the Latest Innovations and a Large Demo Area
April 07, 2026
Music & Lights at MIR 2026 with the Latest Innovations and a Large Demo Area
Music & Lights will be exhibiting at MIR 2026 , the leading Italian trade show dedicated to multimedia integration and professional entertainment technologies, taking place at the Rimini Expo Center from 12 to 14 April 2026. At Stand A3/087, the largest
PROLIGHTS Returns to MIR 2026 with the Premiere of SunBar FLX
April 07, 2026
PROLIGHTS Returns to MIR 2026 with the Premiere of SunBar FLX
PROLIGHTS will be exhibiting at MIR 2026 , the leading Italian trade show for multimedia integration and professional entertainment technologies, held at the Rimini Expo Center from 12 to 14 April. At Stand A3/087, visitors will have the opportunity to
PROLIGHTS launches SunBar FLX: IP65 linear hybrid strobe and flood fixture
March 30, 2026
PROLIGHTS launches SunBar FLX: IP65 linear hybrid strobe and flood fixture
PROLIGHTS launches SunBar FLX , a linear IP65 hybrid LED strobe and wash fixture that expands the Sun family for high-impact strobes and modular blinder looks. Combining versatility, free-form modularity and extreme output, SunBar FLX is designed for
Kings League Italia returns with a PROLIGHTS lighting system bridging sport and streaming
March 26, 2026
Kings League Italia returns with a PROLIGHTS lighting system bridging sport and streaming
The Second Split of Kings League Italia , the seven-a-side football tournament streamed live across multiple platforms, took place at Fonzies Arena in Cologno Monzese , with a PROLIGHTS lighting system at the heart of a production built around one of

Subscribe to our Newsletter

Loading...