New Products View catalogue
StudioCob PlusDY2
ORDER CODE: STUDIOCOBPDY2
Share me

IP65

Immagine Principale
  • STUDIOCOBPDY2
  • STUDIOCOBPDY2
  • STUDIOCOBPDY2
  • STUDIOCOBPDY2
    • StudioCob PlusDY2
    Code Housing Avail.
    STUDIOCOBPDY2BK Black
    STUDIOCOBPDY2WH
    DISCONTINUED    		 White

    StudioCob PlusDY2 is a powerful, incredibly versatile and IP65 rated LED PAR. Fusing the old and the new, it pairs a COB LED source with a traditional parabolic reflector to deliver a proper Par replacement with a homogenised output, single shadow and flexible lens options.

    Features:
    IP65 rated connectors for easy use both indoor and outdoor
    150W 5.000 K COB LED source with HD dimming and high CRI
    Flexible lens options of 19° - 37° - 53,8°

    LIGHT SOURCE
    • Source:
      150
      W
      daylight white LED
    • CCT:
      5.100
    • Luminous flux:
      (19°) 9'822 lm; (37°) 8'595
    • Lux:
      (19°) 2'337 lx; (37°) 600
      lx
      @5 m full
    • CRI:
      > 83
    • Source life expectancy:
      > 50.000 h
    OPTICS
    • Beam angle:
      (on-board) 19°, (inc) 37°, (opt) 53,8
      °
    • Field angle:
      (on-board) 36,5°, (inc) 75,5°, (opt) 77,6
      °
    • Lens type:
      parabolic reflector in combination with HD fresnel lens
    • Additional optics:
      flood (without lens)
    DYNAMIC EFFECTS
    • Static mode:
      selection of static colour
    • Manual mode:
      manual adjustment of dimmer and strobe
    • Auto mode:
      built-in programs with execution speed adjustment
    BODY
    • Body:
      sturdy die-cast aluminium body
    • Body colour:
      black
    CONTROL
    • Protocols:
      DMX512, RDM
    • DMX channels:
      1 / 2 / 5
      channel
    • Display:
      LCD high resolution colour display
    • Firmware upgrade:
      yes, via USB - DMX interface (UPBOXPRO/UPBOX1) not included
    • Master/Slave:
      for synchronised operation of more units linked in a chain
    ELECTRONICS
    • Dimmer:
      linear 0 ~ 100% electronic dimmer
    • Dimmer curves:
      4
      selectable dimming modes available
    • Strobe / shutter:
      1 - 28
      Hz, electronic
    • Display battery:
      self-charging battery backup
    • Operating temperature:
      -20° ~ +45°
    • LED Control:
      flicker free frequency with adjustable PWM
    • Selectable PWM:
      600 ~ 25.000 Hz
    ELECTRICAL
    • Mains power supply:
      100-240V - 50/60Hz
    • Max power consumption:
      165
      W
    • Output (at 230V):
      15
      units on a single power line
    • Power factor:
      > 0.96
    PHYSICAL
    • IP rating:
      65
      for temporary outdoor application, not for fixed installations
    • Cooling:
      active, silent operation
    • Suspension and fixing:
      double hanging bracket suitable for safe hanging and for floor positioning
    • Signal connection:
      Seetronic XLR 5p IN/OUT connectors
    • Power connection:
      Seetronic powerCON waterproof IN/OUT connectors
    • Dimensions (WxHxD):
      258x354x257
      mm
    • Weight:
      4,95
      kg
    CERTIFICATIONS / APPROVALS
    • Certifications / Approvals:
      CE, UKCA, RCM
    BOX CONTENT
    • 1 x STUDIOCOBPDY2
    • 1 x 1,5 meters power cable (BARE END - SEETRONIC IP65 power connector)
    • User Manual
    ITEMS REF.
    Accessory Code
    Description
    C6002BC6002B
    optional
    Slim aluminum clamp, 200kg loading, 48-51mm tubes, M10 bolt, Black
    RSR0630BRSR0630B
    optional
    Steel security cable for hanging bodies, inox steel shackle, L=60 cm, black
    STUDIOCOBPLUSL18STUDIOCOBPLUSL18
    include
    Optics for STUDIOCOBPLUS projectors series, 18°
    STUDIOCOBPLUSL38STUDIOCOBPLUSL38
    include
    Optics for STUDIOCOBLUS projectors series, 38°
    STUDIOCOBTPGSTUDIOCOBTPG
    optional
    Filter frame for STUDIOCOB projectors
    STUDIOCOBPLUSL60STUDIOCOBPLUSL60
    optional
    Optics for STUDIOCOBLUS projectors series, 60°
    STUDIOCOBBDSTUDIOCOBBD
    optional
    Barn door 4 directional flaps to adjust the light beam, f. frame included
    FCLCOBPLUSFCLCOBPLUS
    optional
    Flight case for 8 STUDIOCOBPLUS
    UPBOX1UP5UPBOX1UP5
    optional
    Firmware uploader kit, USB IN, 5pin XLR DMX OUT, USB OUT
    UPBOXPROUPBOXPRO
    optional
    Firmware uploader kit, USB IN, 5-pin XLR DMX OUT connector

    Data sheet & specs

    File name File size Download
    Letter datasheet Studiocobpdy2_A4_DATASHEET_(EN).pdf 367KB
    Letter datasheet Studiocobpdy2_A4_DATASHEET_(IT).pdf 366KB

    User manual

    File name File size Download
    User manual Studiocobpdy2_USER_MANUAL.pdf 2MB

    DMX chart & personalities

    File name File size Download
    DMX chart Studiocobpdy2_DMX_CHARTS.pdf 45KB
    VectorWorks PROLIGHTS_VECTORWORKS_v24_LIBRARY.vwx 310MB
    VectorWorks VECTORWORKS_SYMBOLS.vwx 627KB
    VectorWorks VECTORWORKS_SYMBOLS.vwx 543KB
    VectorWorks PROLIGHTS_VECTORWORKS_v24_LIBRARY.vwx 310MB
    VectorWorks PROLIGHTS_VECTORWORKS_v19_LIBRARY.vwx 478MB
    VectorWorks PROLIGHTS_VECTORWORKS_v19_LIBRARY.vwx 478MB

    Photometrics

    CAD symbols & drawings

    File name File size Download
    3D RFA Studiocobpdy2bk_3D_REVIT.rfa 1MB
    2D Studiocobpdy2_2D.dwg 5MB
    2D cad symbols Studiocobpdy2bk_2DSYMBOLS.dwg 25KB
    3D STUDIOCOBPDY2_3D.zip 1MB
    Technical drawing Studiocobpdy2_TECHNICAL_DRAWING.pdf 226KB

    Tech docs

    File name File size Download

    Software

    File name File size Download

    Firmware

    Firmware update instructions

    1 Download the firmware (only the latest version is available - contact support@prolights.it for more info)

    2 Download the updater software UpBox_Tool 

    3 Follow the instructions in the following guide
    -------------------------------------------------------------------------------
    Notes: 
    • Firmware updates require the UPBOXPRO compatible with all Prolights products
    • It's possible to use UPBOX1 and UPBOX2 *DISCONTINUED* checking the compatibility in the below tab
    • UpBox_Tool  software is compatible with all UPBOX interfaces
    • To update NET boards with .EHEX files a network cable and Professional Uploader software it's needed. It's possible to follow this guide
    Update Tool: UPBOX1UP5 UPBOX1UP5 UPBOXPRO UPBOXPRO
    Check hardware changelog before downloading firmware
    Revision Release date Firmware changelog HW Compatibility
    2.3 STABLE 24/09/2019 Improved RDM functionality. Rev. 1

    Info Request