EclSoft Tube100Pack - M & L Company

New Products View catalogue

EclSoft Tube100Pack
ORDER CODE: ECLST100PACK

Share me

The EclSoft Tube100 is a multipurpose, IP65 wireless linear pixel tube designed for Film & TV, indoor and outdoor environments. The EclSoft Tube100 has a 48W RGB + Warm White LED source with 16 independently-controlled sections. Similar the other fixtures in the soft light range, it has an RGBW mode, RGB, CMY, HSI, XY, RAW Direct, CCT Linear and CCT Presets with +/- green shift, source emulation and industry-standard colour gels. This fixture has high-quality tunable white with ultra-high CRI, as well as on-board cinema effects and pixel effects. This fixture is also “Spektra™ Calibrated”, sharing the same colour calibration standard as some other luminaires. The EclSoft Tube100 can be used wirelessly with its on-board battery and Wireless DMX control (CRMX + W-DMX). There is also a wired connection for mains power and an ethernet port for Art-Net or s/ACN.

The pack includes:
1 x ABS case
8 x ECLSOFTTUBE100
1 x 8-way charger (EST100POWER8)
8 x tripods (EST100FY)
16 x eyebolts (EST100EB)
16 x clamps with magnets (EST100OSPLUS with ENPTWCMAG)
16 x baby pins (EST100BP)
8 x wingplate (EST100WP)
2 x crossplate (EST100CP)
1 x User Manual

Features:
Hybrid fixture, Wireless DMX (CRMX+W-DMX) / ethernet control, battery/mains power
Pixel control, on-board cinema pixel engine, RGB + Warm White LED source with high CRI (up to 93) and TLCI
IP65 for outdoor applications

LIGHT SOURCE

Source:

48
W

RGB + Warm White
Luminous flux:

2'386

@full
Lux:

71
lx

@3 m
Lux:

161
lx

@2 m
CRI:

93
R9:

92
TLCI:

91
TM30 Rf:

91
TM30 Rg:

105
Source life expectancy:

> 50.000 h

OPTICS

Beam angle:

128
°
Field angle:

199
°
Lens type:

frosted acrylic tube

COLOUR SYSTEM

Colour control:

XY, CCT, RGBW, Gel, HSI, Source Emulation, colour macros, CTO on colours
Colour mixing:

RGB + Warm White
CCT:

CCT control, + / - green correction, tungsten emulation
White presets:

2.800 K - 10.000
K

with 28 K resolution
Colour wheel:

virtual colour wheel with macros
Macros:

several pre-built pixel macros with adjustable speed

DYNAMIC EFFECTS

Control Resolution:

16-bit dimmer, colours
Pixel patterns:

pre-programmed pixel macros and cinema lighting effects patterns
FX generator:

16 sections with

adjustable foreground/background colour, index, speed, direction
Static mode:

selection of static colour
Manual mode:

manual adjustment of colour
Auto mode:

built-in programs with execution speed adjustment
Special features:

linear crossfade channel from any white to any colour; virtual CTO on colours

BODY

Body:

sturdy policarbonate and die casting aluminium
Body colour:

black on the back and white wash on the front

CONTROL

Protocols:

Art-Net, Kling-Net, sACN, CRMX+W-DMX
DMX channels:

main personality 1 / 2 / 13 / 14 / 18 / 19 / 20 / 23 / 33 / 43
channel
Wireless Control:

included, LumenRadio Timo Fx DMX/RDM compatible with both CRMX (Lumen Radio) and W-DMX (Wireless DMX)
RDM:

RDM for remote monitoring and settings
Display:

Graphic User Interface
Firmware upgrade:

yes, via USB - DMX interface (UPBOX1+EST100UPBOXI) not included
IR:

infrared sensor controlled by remote (included in the pack, not included in single unit)
Master/Slave:

for synchronised operation of more units linked in a chain

ELECTRONICS

Dimmer:

linear 0 ~ 100% electronic dimmer
Dimmer curves:

4

selectable dimming modes available
Strobe / shutter:

1 - 30

Hz, electronic
Operating temperature:

0° ~ +45°
LED Control:

flicker free frequency with adjustable PWM
Selectable PWM:

3.000 / 6.000 /12.000 / 24.000 Hz

ELECTRICAL

Max power consumption:

55 W
Mains power supply:

100-240V - 50/60Hz
Low Voltage DC mains:

24V
Power factor:

>0,96

BATTERY

Battery:

24
V

lithium
Estimated battery life:

Selectable 3h / 6h / 8h / 12h / 16h / 18
h
Re-charge connection:

DC with jack and AC with standard powercon connector
Re-charge time:

5
h/max
Battery status:

shown on display
Other:

Battery recharge in AC and DC, operation in main power with possibility to disable battery recharge throught software and charging operation in flightcase through external charger

PHYSICAL

IP rating:

IP65

for temporary outdoor application, not for fixed installations
Cooling:

passive cooling and fan-free
Suspension and fixing:

M5 threaded insert for eye bolt, floor stand and clamp for wall installation
Data connection:

Seetronic RJ45 IP65 IN
Power connection:

DC connector for battery recharge and Seetronic powerCON TRUE IP65 IN
Dimensions (WxHxD):

1.163x50x50
mm
Weight:

(pack) 49,4
kg

CERTIFICATIONS / APPROVALS

Certifications / Approvals:

CE, UKCA, RCM, cTUVus, FCC

ITEMS REF.

Accessory Code

Description

EST100OSPLUS